Lantronix SDSTX3110-124-LRT-B, User Manual

Page: 31 / 94

Lantronix
SDSTX3110-124-LRT-B User Guide
33686 Rev. C https://www.lantronix.com/ 31
Save/Load tab
This page lets you save the current config file to a local drive or network location to which your management
computer can connect.
Label Description
Save Configuration to Flash
Click the “Apply and Save” button to save all applied settings into the
flash memory of the device.
Load Default
Changes all parameter settings to factory defaults except network
settings. If you want to load all factory default settings, press the
Reset
button on the device front panel (Hardware reset).
Reboot Device
Click this button to re-boot the device; you must broadcast again to
search for the device (warm start).
Import Configuration
Click this button to retrieve a saved configuration file and apply it to
the current device.
Export Configuration
Click this button to save the current parameters to a file and export it
to a current host. At the “Save As” dialog, browse to a “Save in”
location, enter a file name and file type, then click the Save button.
Click the “ Apply Only ” button to immediately apply the settings, but not save applied settings into the flash
memory of the device.
Click the “
Apply and Save ” button to immediately apply the settings and to save all applied settings into the flash
memory of the device.
Click the
Refresh button to update the screen content / undo changes made since last Save.