Command Reference
Security Commands
12-177
12.10.24 Set/Define SNMP
Configures a community name and access mode for SNMP access. Each name has an access restriction
associated with it; if an SNMP command comes in with an unknown name or an unauthorized command,
an SNMP error reply will be sent. Community names are not case-sensitive.
Restrictions
You must be the privileged user to use this command.
Parameters
community
A text name, up to 16 characters long.
Access
Specifies the type of SNMP access. Must be used in conjunction with one of
the following parameters: Both, None, or Readonly.
Both
Both read and write requests will be permitted.
None
No SNMP requests are permitted.
Read
Read-only access will be permitted.
Examples
Local>> SET SNMP COMMUNITY SUNMAN ACCESS BOTH
See Also
Clear/Purge SNMP, page 12-153; ,
12.10.25 Show/Monitor/List Authentication
Displays the local authentication database.
Restrictions
Requires privileged user status.
Parameters
username
Displays authentication information for the specified user.
Examples
Local>> SHOW AUTHENTICATION USER “bob”
See Also
Set/Define Authentication, page 12-153;
Local (NVR) Database
, page 11-9
SET
DEFINE
⎩
⎭
⎨
⎬
⎧
⎫
SNMP COMMUNITY
community
ACCESS
BOTH
NONE
READ
⎩
⎭
⎪
⎪
⎨
⎬
⎪
⎪
⎧
⎫
SHOW
MONITOR
LIST
⎩
⎭
⎪
⎪
⎨
⎬
⎪
⎪
⎧
⎫
AUTHENTICATION USERS
username
Summary of Contents for SCS
