manualshive.com logo in svg

Lantronix SCS, Reference Manual

Introducing the Wisdom SCS – an exceptional electronic device designed to revolutionize your daily routine. Access the comprehensive Owner's Manual for free download, providing detailed instructions and insights on maximizing the product's potential. Visit our website today to effortlessly obtain the manual and unlock the true power of Wisdom SCS.

Share
Download
background image

Command Reference

Service Commands

12-104

None

Clears any previously-configured string.

Defaults

No string configured

See Also

Clear/Purge Service, page 12-101

12.7.7   Set/Define Service Formfeed

If enabled (the default), the SCS will append a formfeed at the end of any LPR print jobs.

Restrictions

Requires privileged user status.

Defaults

Enabled

See Also

Clear/Purge Service, page 12-101

12.7.8   Set/Define Service Identification

Provides an information string for the specified service.

Restrictions

Requires privileged user status.

Parameters

string

Enter an information string of up to 40 characters.

SET

DEFINE

⎩

⎭

⎨

⎬

⎧

⎫

SERVICE

 ServiceName

 FORMFEED

ENABLED

DISABLED

⎩

⎭

⎨

⎬

⎧

⎫

SET

DEFINE

⎩

⎭

⎨

⎬

⎧

⎫

SERVICE

 ServiceName

 IDENTIFICATION

string

NONE

⎩

⎭

⎨

⎬

⎧

⎫

Summary of Contents for SCS









































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SCS

IBM 88631SU - System x3850 - 8863 Installation Manual preview
88631SU - System x3850 - 8863
Brand: IBM Pages: 90
US Robotics USR8700 User Manual preview
USR8700
Brand: US Robotics Pages: 156
HPE 3PAR StoreServ Service And Upgrade Manual preview
3PAR StoreServ
Brand: HPE Pages: 174
IBM Netfinity 1000-8477 21Y Hardware Maintenance Manual preview
Netfinity 1000-8477 21Y
Brand: IBM Pages: 268
IBM Power 780 Technical Overview And Introduction preview
Power 780
Brand: IBM Pages: 220
Supero SuperServer 6026TT-HIBQF User Manual preview
SuperServer 6026TT-HIBQF
Brand: Supero Pages: 112
MAXDATA PLATINIUM 9000-4R User Manual preview
PLATINIUM 9000-4R
Brand: MAXDATA Pages: 18
dallmeier SMAVIA DMS 2400 II Manual preview
SMAVIA DMS 2400 II
Brand: dallmeier Pages: 36
LOOQS MB202 User Manual preview
MB202
Brand: LOOQS Pages: 69
Kraun Video Server User Manual preview
Video Server
Brand: Kraun Pages: 36
Buffalo TeraStation TS-RXL/R5 User Manual preview
TeraStation TS-RXL/R5
Brand: Buffalo Pages: 91
Asus AP1720-E1 User Manual preview
AP1720-E1
Brand: Asus Pages: 78
Asus AP100 Hardware Reference Manual preview
AP100
Brand: Asus Pages: 32
Asus Aaeon AIOT-ILRA01 User Manual preview
Aaeon AIOT-ILRA01
Brand: Asus Pages: 39
Asus AP140R-E1 User Manual preview
AP140R-E1
Brand: Asus Pages: 132
Asus AP1710-I5 User Manual preview
AP1710-I5
Brand: Asus Pages: 60
Asus AP140R User Manual preview
AP140R
Brand: Asus Pages: 44
Asus AP130 User Manual preview
AP130
Brand: Asus Pages: 40

Brands by name

Popular brands

Load more brands