5: Commands and Levels
severity log level none
No logging.
severity log level notice
Log only Notice and more severe events.
severity log level warning
Log only Warning and more severe events.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
show statistics
Displays the syslog statistics.
state disable
Disables syslog logging.
state enable
Enables syslog logging.
write
Stores the current configuration in permanent memory.
telnet (config-cli-telnet) level commands
authentication disable
No password required for Telnet users.
authentication enable
Challenges the Telnet user with a password.
clrscrn
Clears the screen.
default max sessions
Restores the default maximum allowed concurrent incom-
ing Telnet sessions.
default port
Restores the default local port to the Telnet server.
exit
Exits to the CLI level.
max sessions
<number>
Sets the maximum allowed concurrent incoming Telnet
sessions. <number> = number of sessions.
port
<number>
Sets the local port that the Telnet server uses. <number>
= local port number.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
show statistics
Displays the Telnet statistics.
state disable
Disables the Telnet Server.
state enable
Enables the Telnet Server.
write
Stores the current configuration in permanent memory.
terminal 1 (config-terminal:1) level commands
break duration
<milliseconds>
Sets how long a break should last when it is being sent to
the line. <milliseconds> = number of milliseconds.
clrscrn
Clears the screen.
default break duration
Restores the break duration to the default value (500 ms).
default terminal type
Sets the default terminal type, "UNKNOWN".
echo disable
Disables echoing of characters received on the line back
to the line.
echo enable
Enables echoing of characters received on the line back
to the line.
exit
Exits to the configuration level.
exit connect menu disable
On the login connect menu, removes the menu item al-
lowing the user to exit to the CLI.
exit connect menu enable
On the login connect menu, inserts the menu item allow-
ing the user to exit to the CLI.
line
<line>
Enters the line level. <line> = number of the line (serial
port) to be configured.
PremierWave® XC Intelligent Gateway Command Reference
247
