5: Commands and Levels
clrscrn
Clears the screen.
default state
Sets default GPRS roaming state.
exit
Exits to the next higher level.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
state disabled
Disables GPRS roaming.
state enabled
Enables GPRS roaming.
state no change
GPRS roaming state is not changed.
write
Stores the current configuration in permanent memory.
host 1 (tunnel-connect-host:2:1) level commands
address
<text>
Sets the remote host to establish tunneling connections
with. <text> = IP address or host name of the remote host.
aes decrypt key
<hexadecimal>
Sets the connect tunnel AES decrypt key with up to 16
bytes. Each byte is represented by two adjacent hex dig-
its. Bytes may run together or be separated by optional
punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc
12:3a:bc Note that quotes must enclose the value if it con-
tains spaces.
aes decrypt key text
<text>
Sets the connect tunnel AES decrypt key with up to 16
bytes. Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
spaces.
aes encrypt key
<hexadecimal>
Sets the connect tunnel AES encrypt key with up to 16
bytes. Each byte is represented by two adjacent hex dig-
its. Bytes may run together or be separated by optional
punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc
12:3a:bc Note that quotes must enclose the value if it con-
tains spaces.
aes encrypt key text
<text>
Sets the connect tunnel AES encrypt key with up to 16
bytes. Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
spaces.
auto show statistics
show connection statistics
clrscrn
Clears the screen.
credentials
<text>
Selects the RSA/DSA certificates by name for the SSL
client.
default protocol
Restores the default protocol as "TCP".
default tcp keep alive
Restores the default 45 second connect mode TCP keep
alive timeout.
exit
Exits to the next higher level.
no address
Removes the remote host address used to establish tun-
neling connections.
no aes decrypt key
Removes the connect tunnel AES decrypt key.
no aes encrypt key
Removes the connect tunnel AES encrypt key.
no credentials
Clears the RSA/DSA certificate selection.
no port
Removes the remote port used to establish tunnel con-
nections.
no ssh username
Removes the SSH user name.
no tcp keep alive
Disables the connect mode TCP keep alive timeout.
PremierWave® XC Intelligent Gateway Command Reference
142
