Open-Q 2100 Development Kit
Open-Q™ 2100 Dev Kit User Guide
39
3.9.14.1
LCD display panel
The LCD panel comes preinstalled on the Lantronix Open-Q display adaptor board (P/N# QC-DB-J00005).
Below are the Panel specifications:
•
Resolution:
480x854
•
LCD Type:
IPS
•
PCAP touch panel with cover glass
•
No of Lanes:
1 x 2 lane MIPI DSI interface via Display Board.
•
Diagonal Length
: 4.5”
•
Note: The display above when mounted on the Lantronix Open-Q Display Adapter is meant to work with the
carrier board. Altering the use of this LCD panel is not recommended.
3.9.15
Camera Connector J2500
The Open-Q 2100 Development Kit supports one 2-lane MIPI CSI camera interfaces via a JAE 41-pin
connector.
The following are some features of the camera connectors:
•
1 x 2 lane MIPI CSI signals
•
I2C control (CCI0)
•
Camera CSI connector is on the carrier board edge
•
Self-regulated camera modules can be powered with 3.3V power (SBC_VREG_3P3)
•
Uses JAE FI-RE41S-VF connector for exposing MIPI, CLK, GPIOs and Power rails.
•
Please use JAE FI-RE41S-HF and corresponding cable to mate with the camera connectors on the
carrier board
Figure 23 J2500 Camera Connector
The figure above shows the MIPI CAM0 (J2500) connector.
The table below outlines the pin outs of the connector
Table 3.9-9 MIPI CSI Camera Connector J2500 Pin out
