Open-Q 2100 Development Kit
Open-Q™ 2100 Dev Kit User Guide
38
Connecting the Display Board to the Development Kit
This configuration allows the user to use the LCD display that comes with the display adaptor board. As
shown in the picture below, the MIPI DSI0 lines, which come from the 51-pin JF08 connector, directly
connects to the LCD panel via flex cable (part number: JF08R0R051020MA). See the section below for more
details on this LCD panel. It is important to note that connector J400 on the display board needs to connect to
J2300 on the carrier board for this configuration to work.
Figure 22 Display Board Default Configuration
51 pin
flex cable
J2300
J400
Display Board
Carrier board