Lantronix
M/GE-PSW-PSE-01 User Guide
Page
10
of
11
LED Descriptions
LED
Description
Two-up Bi-Color
LEDs
Top LED - TP Status:
•
Green = Gigabit
•
Yellow = 100 or 10 speeds.
•
Off = no link
•
There is no indication for duplex
Bottom LED - Fiber Status:
•
100FX TP Link/Activity: Yellow On = Link. Yellow Blinking = Activity
•
1000X TP Link/Activity: Green On = Link. Green Blinking = Activity
Power LED
Green ON = power applied to board
PoE Status LED
When powering an 802.3af PD: Yellow = On
When powering an 802.3af PD over-load or short: Yellow Blinking at 1Hz
Vin under-voltage or IC over-temp: Yellow Blinking at 4Hz
When powering an 802.3at PD: Green = On
When powering an 802.3aftPD over-load or short: Green Blinking at 1Hz
APR Status LED
inside enclosure
•
Solid green: APR is armed and ready to reset power to the PSE port when the fiber
link status goes to the down state.
•
Blinking green: APR is not ready; waiting for timeout or fiber link to be re-
established.
Note
: The TP-L/A Act 1000 and SFP-L/A Act 1000 flash green because this converter has MAC Learning disabled,
so whenever a packet is received on one port, that packet will always be repeated on the other port. This
functionality causes the Activty LED for BOTH ports to ALWAYS flash in unison, even for unidirectional traffic.
Compliance Information
