Lantronix LSS2200-8P, Install Manual, Page: 16 / 47

Lantronix LSS2200-8P Install Guide
33860 Rev. A https://www.lantronix.com/ 16
Front Panel
⓪ Expansion slot/cover (for future use)
① SW1 : 4-position DIP Switch:
#1 - Enable/Disable PHO
*
to PoE Power interlock
#2 - Input 1 relay normal state (not active)
#3 & 4 - PoE power down selection
② L/A : Link Activity LED for SFP++ Port 2)
③④ P9 & P10: Two 10/5/2.5/1G SFP++ Ports
(SFP++ Port 1 & 2)
⑤ L/A : Link Activity LED for SFP++ Port 1
⑥ DIO1 & DIO2 : Digital Input/Output 1 & 2
⑦ P1 – P8 : 10/100/1000 PoE++ Ports
⑧ Ground screw hole
⑨ ⑩ PS #1 and PS #2: Power Supply 1 and 2 LEDs
⑪ 56 VDC + /- : Terminal connector for dual 56VDC
input power
⑫ BLE : Bluetooth Low Energy connector
⑬ RESET : System reset button
⑭⑮⑯ PHO On LED, S1 LED, and P (Power) LED
⑰ CONSOLE Port
( * Note : PHO is currently Disabled by default; do not override until fully supported.)
RESET Button
The RESET button is inset from the front panel. Use a thin object such as a paperclip to depress the button.
Press the front panel RESET button for 1-5 seconds to reset the switch.
Press the front panel RESET button for over 5 seconds to restore the switch to its factory defaults.