Lantronix
C2110 Install Guide
33415 Rev. C
Page 15 of 24
SNMP
See the on-line documentation that comes with Lantronix
FocalPoint™
or
ION
software for applicable
commands and usage.
Use SNMP at an attached terminal or at a remote location to monitor the following C2110 activities:
•
Media-converter power
•
Copper link status and fiber link status
•
Twisted-pair cable length
•
Hardware switch settings
•
Fault condition
Also, use SNMP to enter network commands that:
•
Enable/disable Auto-Negotiation
•
Enable/disable Link Pass-Through (LPT)
•
Enable/disable Far-End Fault (FEF)
•
Enable/disable Pause
•
Enable/disable AutoCross
•
Power down the C2110