Technical Data
FOX3-2G/3G/4G Series Hardware Manual
23
"
PFAL,GSM.Send.TCP...
" allows sending the protocols via TCP to a remote server including the
current device location, GPS state, UTC time, date, speed and course over ground. The received
protocols by the server can then be used for graphically representation of the device location.
Installing such a device in a vehicle, lets you know where your vehicle is, what is happening with
your vehicle, has your vehicle been moved without authorization from a park area, updating vehicle
movements in real time and more. The TCP server developed by called "
D2Sphere
" has a lot of such
features allowing you to have a full control of your vehicle, fleet and your assets.
NMEA
Description
GPGGA
It contains GPS time, position and fix type data.
GPGLL
It contains GPS latitude, longitude, UTC time of position fix and status.
GPGSA
It contains satellites used in the GPS position solution and DOP values.
GPVTG
It contains the number of GPS satellites in view satellite ID numbers, elevation, azimuth and SNR values.
GPGSV
It contains the number of GPS satellites in view satellite ID numbers, elevation, azimuth and SNR values.
GPRMC
It contains GPS time, date, position, course and speed data.
GLGSA
It contains the GNSS DOP and Active Satellites (if GLONASS activated)
GLGSV
It contains the GNSS satellites in view (if GLONASS activated)
GPIOP
It contains the status of digital/analog inputs and output ports and battery voltage (if battery available).
GPGSM
It contains the GSM operator, reception, registration status, GSM field strength, area code and cell ID.
GPAREA
It contains the state (entered or left the area/geofence) of 32 areas and 100 geofences - such as territory
management, route verification, prohibited locations, parking area and more.
GP3DP
It contains the state values of the motion sensor.
BIN
The user protocol contains GPS time, date, position, course and speed data in binary format (small sized -
only 21 characters).
Table 5
:
NMEA Output Messages