Lantronix FOX3-2G Series, Hardware Manual

Page: 19 / 51

Technical Data
FOX3-2G/3G/4G Series Hardware Manual 19

Backup Li-Polymer battery

Car Installation Cable

Accessory Installation Cable

GSM/GNSS quad-band external antenna (FAL-ANT-11) for FOX3

GSM/GNSS penta-band external antenna (FAL-ANT-12) for FOX3-3G

GSM/GNSS penta-band external antenna (FAL-ANT-14) for FOX3-4G

IOBOX-MINI (external I/O extension device - up to 13 inputs/outputs)

IOBOX-CAN (external device with 2 nd CANBus interface and 8 I/O)

Casing:

Fully shielded.

Air humidity:

5 % up to 95 % (non-condensing).

Directive:

RoHS compliant (RoHS Directive 2002/95/EC)

Firmware:

Embedded TCP/IP stack, including TCP, IP, SMTP and
UDP protocols

Accessible via PFAL commands

Upgradable locally via serial port and remotely over the
air (OTA).

Internal memory:

8 Mbyte FLASH for configuration, data-logging and
firmware storage

2 MByte RAM.

Supported protocols:

NMEA Msg.: GLL, GGA, RMC, VTG, GSV, GSA

Own Msg.: IOP, GSM, AREA, 3DP, BIN - see related
documents [1] and Table 5.

GSM/3G/4G/GNSS antenna:

Internal antennas and external antenna ports with built-
in auto switch

Connect / Disconnect event generation.