Lantronix EDCA-DIO-01 Install Manual Download Page 2

Lantronix

 

 

EDCA-DIO-01 Install Guide 

33790 Rev. C 

https://www.lantronix.com/

  

Intellectual Property 

© 2022 Lantronix, Inc. All rights reserved. No part of the contents of this publication may be transmitted or reproduced in 

any form or by any means without the written permission of Lantronix. 

Lantronix 

is a registered trademark of Lantronix, Inc. in the United States and other countries. All other trademarks and 

trade names are the property of their respective holders. 
Patented: 

https://www.lantronix.com/legal/patents/

; additional patents pending. 

Warranty 

For details on the Lantronix warranty policy, go t

http://www.lantronix.com/support/warranty

. 

Contacts 

Lantronix Corporate Headquarters 

48 Discovery, Suite 250 

Irvine, CA 92618, USA 

Toll Free: 800-526-8766 

Phone: 949-453-3990 

Fax: 949-453-3995 

Technical Support 

Tel: +1 (800) 526-8766, Tel: +1 (949) 453-3990, or 

https://www.lantronix.com/technical-support/ 

Sales Offices 

For a current list of our domestic and international sales offices, go t

www.lantronix.com/about/contact. 

 

Disclaimer  

All information contained herein is provided “AS IS.” Lantronix undertakes no obligation to update the information in this 

publication. Lantronix does not make, and specifically disclaims, all warranties of any kind (express, implied or otherwise) 

regarding title, non-infringement, fitness, quality, accuracy, completeness, usefulness, suitability or performance of the 

information provided herein. Lantronix shall have no liability whatsoever to any user for any damages, losses and causes 

of action (whether in contract or in tort or otherwise) in connection with the user’s access or usage of any of the 

information or content contained herein. The information and specifications contained in this document are subject to 

change without notice. 

Revision History 

Date 

Rev 

Notes 

7/31/19 

Initial release. 

9/9/19 

Add MTBF information and update Magnetic Contact Switch P/N. 

2/24/22 

Remove DIN Rail Clip 22507; initial Lantronix re-brand 

 

 

 

 

 

Summary of Contents for EDCA-DIO-01













Reviews: