Lantronix
EDCA-DIO-01 Install Guide
33790 Rev. C
11
Compliance Information
Declaration of Conformity
Manufacture’s Name: Lantronics, Inc.
Manufacture’s Address: 48 Discovery, Suite 250, Irvine, California 92618 USA
Declares that the products: EDCA-DIO-01 Enclosure Door Contact Alarm
Conform to the following Product Regulations:
FCC Part 15 Class A, EN 55032:2012, EN 55024:2010
Directive 2014/30/EU
Low-Voltage Directive 2014/35/EU
With the technical construction on file at the above address, this product carries the CE Mark
Place: Irvine, California
Date: April 27, 2022
Signature:
Fathi Hakam
Full Name: Fathi Hakam
Position: Vice President of Engineering
FCC Regulations
NOTE
: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
