Lantronix CoBox-FL, User Manual

Page: 38 / 135

Getting Started
2.6 Serial Port Login
If you want to initially configure the unit through a serial connection, follow these steps:
,
to
d down the x key at the terminal (or
n. To
0.
1. Connect a console terminal or PC running a terminal emulation program to your unit's
serial port. The default serial port settings are 9600 baud, 8 bits, no parity, 1 stop bit, no
flow control.
2. To enter Setup Mode, cycle the unit's power (power off and back on). After power-up
the self-test begins and the red Diagnostic LED starts blinking. You have one second
enter three lowercase x characters.
ode is to hol Note: The easiest way to enter Setup M
emulation) while powering up the unit.
3. At this point, the screen display is the same as when you use a Telnet connectio
continue with a serial port login, go to
Using a Telnet Connection
on page 3-1
2-12 CoBox-FL User Guide