A Lantronix Company
PC Fiberlynx User Guide
PC Fiberlynx User Guide
PC Fiberlynx User Guide
PC Fiberlynx User Guide
15.00.034 Rev. C
2-5
2.5 Connecting
the
CPU
Connecting the PC Fiberlynx is simple as it uses industry-standard connectors for each end of
the connection: at the CPU end, and at the remote or User end. Both models of PC Fiberlynx
will connect in a similar fashion at both ends; the only difference is that the
PC/SUN model
has
connections for both PC (PS/2) and SUN computers and keyboard and mice.
The
PS/2 Only
model does not have a SUN Keyboard and Mouse connector.
SUN / PC model
PCFiberlynx (SUN/PC) transmitter
1.
Place the CPU with the PCFiberlynx transmitter. Connect the keyboard and mouse ports
of the CPU to the keyboard and mouse ports of the PCFiberlynx transmitter using the
two 6-pin mini-DIN cables (PS/2),
or
using the one mini-DIN8 cable (SUN).
2.
Connect the video output of the CPU to the lower video connector of the transmitter
using the provided HD15 (VGA) cable. A monitor may be attached to the upper video
connector to view the video output of the CPU locally.
3.
Connect the CPU audio ports to the transmitter using the provided 3.5 mm audio cables.
The port marked “MIC OUT” on the transmitter connects to the microphone port on the
CPU, while the “LINE IN” port on the transmitter connects to the speaker port on the
CPU.
4.
Connect the CPU serial port to the transmitter serial port using the provided cable.
5.
Connect the transmitter to AC power and turn on the switch. The status LEDs found on
the front of the unit should light.
