17
Ground
– IP54 model
The chassis is grounded via a separate ground nut (M6).
Use toothed locking washers for a good electrical connection.
Ground screw of IP54 model
Ground
– IP41 model
The chassis is grounded via a separate ground nut (M3).
Use toothed locking washers for a good electrical connection.
Ground screw of IP41 model
*Note: The torque should not be over 14 kilogram-force centimeter
(kgf·cm). Using torque over 14 kgf·cm may cause damage to the
grounding parts.
3.1.5 Connect the M12 connector with RJ-45 data cable, ports are not
used shall be caped that comes with the package to insulate the
surrounding.
