18
Ground screw of Ethernet switch
Ground
– IP54 model
The chassis is grounded via a separate grounding nut (M6).
Use toothed locking washers for a good electrical connection.
*Note: The torque should not be over 14 kilogram-force centimeter (kgf·cm).
Using torque over 14 kgf·cm may cause damage to the grounding parts.
Ground screw of the switch
3.1.5 Connect the M12 connector with RJ-45 data cable, ports are not
used shall be caped that comes with the package to insulate the
surrounding.
Summary of Contents for IES-5416T Series
Page 8: ...7 2 2 Front Panel PoE model ...
Page 9: ...8 Non PoE model 2 3 Package Content Ethernet switch Console cable Manual CD by request ...
Page 20: ...19 Pin assignment of M12 10 100Tx network connector ...
Page 22: ...21 protection Empty ports must be sealed with the protective caps supplied ...
