14
Chapter 3 Hardware Installation
For POE models: Do not use units’ POE ports to uplink to another POE switch in vehicle
applications. (May Cause Damage) Lantech strongly advise the installation of a Galvanic isolated
DC/DC converter between the power supply and the Ethernet switch on all Non-Isolated models.
Please contact the sales team for advice on which models support isolated power design.
3.1Hardware installation
3.1.1Unpack switch and check the accessory with packing content list
3.1.2 Mount the switch on desired position. For the best ventilation, it is
suggested to mount the switch on metallic surface.
3.1.3 Connect the M12/M23 connector of power input. The power supply
for the series is connected via a 5-pole M12/M23 male connector.
*May
vary by models. Please check the front panel of the switch.
Note:
Please check the power connector has been connected to the switch
correctly before you turn on the power resource.
Voltage of Power Input
Non-PoE model
24V model:
9V to 36VDC
24VI model:
9V to 36VDC with galvanic isolation
24TVI model:
Summary of Contents for IES-5416T Series
Page 8: ...7 2 2 Front Panel PoE model ...
Page 9: ...8 Non PoE model 2 3 Package Content Ethernet switch Console cable Manual CD by request ...
Page 20: ...19 Pin assignment of M12 10 100Tx network connector ...
Page 22: ...21 protection Empty ports must be sealed with the protective caps supplied ...
