© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifi cations and details are correct at time of print.
January 16
Fireball Par64S Plus Owner Handbook ™
6 - REMOTE CONTROL
The IR Remote will allow you to control your Lanta Fireball Par 64S Plus™ with the need for
a controller. Note – you will need to point the remote towards the receiver eye which is
on the front face of the light for it to work.
Press the “AUTO” button to set the light to run in Auto mode as described in section 2.
Press the “SOUND” button to set the light into Sound mode. “SENSITIVITY” will allow
adjustment using “+” & “-“ of a value between 1 & 31.
Press the “STROBE” button to set the light into Strobe. Press it again to turn off Strobe.
Adjustment of speed can be set via “+” & “-“.
A quick set can also be input by entering a value between 1 & 99. To do this, enter a
value using the numeric buttons and then “%”.
ie: “9” + “9” + “%” 99.
Pressing the “SPEED” or “FADE” button and following the same method as setting strobe will
allow adjustment of these values. The maximum values are 100.
Press “MANUAL” to enter static colour mode. “+” & “-“ will change the selected colour.
Number
0
1
2
3
4
5
6
7
8
9
Colour
White
Red
Orange
Yellow
Green
Cyan
Blue
Purple
Pink
Amber
Pressing either “R” / “G” / “B” will enter colour matching mode and the values can be
adjusted using “+” / “-“
Press “BLACKOUT” to turn the light off, press it again to turn it back on. Previous values will
be retained.
Press “BLACKOUT” + “9” + “8” + “7” to restore all settings to factory default.
# Note: When in DMX mode and SLAVE mode there is no IR remote function.
