14
“LP-SGW 2404FP>” will appear after pressing the
Enter
button. It
indicates that you can use the CLI now.
5.2.2 Logon by Telnet
To log on to the switch by a Telnet connection, please take the following
steps:
1. Firstly CLI commands about configuring Telnet login mode, login
authentication information and Privileged EXEC Mode password
should be configured through Console Connection. For more details
please refer to the CLI Reference Guide on the resource CD
(LP-SGW 2404FP_RG_ENB01W)
2. Make sure the switch and the PC are in the same LAN.
3. Click Start
→
Run to open the Run window, then type “cmd” to login
the Command Prompt.
4. Type
telnet 192.168.0.1
in the command prompt and press the
Enter
button to telnet the switch.
5. Type the User name and Password (the factory default value for both
of them is “admin”) to log on the switch, then you can use the CLI
now.
Note:
For detailed CLI configuration instructions, please refer to the CLI Reference
Guide on the resource CD.
