7
1) Set the switch on a flat surface strong enough to support the entire weight
of the switch with all fittings.
2) Remove the adhesive backing papers from the rubber feet.
3) Turnover the switch and attach the supplied rubber feet to the recessed
areas on the bottom at each corner of the switch.
Figure 3-1 Desktop Installation
3.2.2 Rack Installation
To install the switch in an EIA standard-sized, 19-inch rack, follow the
instructions described below:
1) Secure the supplied rack-mounting brackets to each side of the switch
with supplied screws, as illustrated in the following figure.
Figure 3-2 Attaching Brackets
2) After the brackets are attached to the switch, use suitable screws (not
provided) to secure the brackets to the rack, as illustrated in the following
figure.
