www.lanpro.com
Wireless - Equipment - 2.4 GHz - LP-N24, 123 Manual, PTP and MTP mode Installation
15
II.3
.17. Once booted, the equipment will ask for a password, if not, open the browser and access the equipment as
shoen in paragraphs B.3.10 and B.3.11.
II.3
.14. Select the Type of Encryption for WDS,
remember to use the same you configured in paragraph
18, because this is the link between both networks (A and
B); in this case use: TKIP, as shown in figure 42.
II.3
.18. Proceed now to change the administration
password by selecting option: System Tools
,
Change
Password , input in the new password in: New Password
and again in:
Re-enter to Confirm
and select: Apply
,
as shown in figure 45; remember to store your password
in a safe place because the equipment will ask for it for
administration from now-on .
II.3
.15.
Proceed to input the encription and Pass Phrase
for WDS (The same for paragraph B.2.16) and then select:
Apply, as shown in figure 43.
II.3
.16. The equipment will boot as shown in figure 44.
Figure 42
Figure 45
Figure 43
Figure 44
