www.lanpro.com
Wireless - Equipment - 2.4 GHz - LP-1521 User Manual High Speed Long Range Wireless Broad Band Router, with PoE
Wireless - Advanced Settings
These settings are only for more technically
advanced users who have a sufficient
knowledge about wireless LAN. These
settings should not be changed unless you
know what effect the changes will have on
your WLAN Broadband Router.
Figure 14
Screen snapshot – Operation Mode
Item
Description
Authentication Type
Click to select the authentication type in
Open System
,
Shared Key
or
Auto
selection.
Fragment Threshold
Set the data packet fragmentation threshold, value can be written between 256 and
2346 bytes.
Refer to
4.10 What is Fragment Threshold?
RTS Threshold
Set the RTS Threshold, value can be written between 0 and 2347 bytes.
Refer to
4.11 What is RTS(Request To Send) Threshold?
Beacon Interval
Set the Beacon Interval, value can be written between 20 and 1024 ms.
Refer to
4.12 What is Beacon Interval?
Data Rate
Select the transmission data rate from pull-down menu. Data rate can be auto-select,
11M, 5.5M, 2M or 1Mbps.
Broadcast SSID
Click to enable or disable the SSID broadcast function.
Refer to
4.14 What is SSID Broadcast?
IAPP
Click to enable or disable the IAPP function.
Refer to
4.20 What is Inter-Access Point Protocol(IAPP)?
802.11g Protection
Protect 802.11b user.
RF Output Power
To adjust transmission power level.
Turbo Mode
Click to enable/disable turbo mode.
(Only apply to WLAN IC of Realtek).
Apply Changes
Click the
Apply Changes
button to complete the new configuration setting.
Reset
Click the
Reset
button to abort change and recover the previous configuration setting.
14
