Battery Instructions
3.2
Adjustment knob
5
6
Scenario 1
Scenario 2
Not OK
Scenario 3
Scenario 4
(with extender tube)
OK
(with extender tube)
OK
Operation
4
Balance adjustment
4.1
*Please note that the nominal Voltage of the gimbal is 7.4V
Each 18350 & 18650 battery is 3.7V. Therefore, the gimbal MUST operate on a
maximum of TWO batteries.
Batteries must be combined as per below scenarios:
Battery installation:
Unscrew the battery compartment cap and install two 18350 batteries; or add the handle
extender and install two 18650 batteries (install the positive end first)
Not OK
A. Open the smartphone clamp and insert the smartphone
B. Hold the handle as shown below, loosen the black adjustment knob, then slide the
smartphone forwards or backwards until the smartphone is leveled. Let go of the
smartphone and if it stays leveled, tighten the black adjustment knob. Otherwise,
make the necessary adjustment until achieving balance.
Extending the tube to
install 2pcs 18650 batteries.
Make sure to attach extender before
installing the 18650 batteries.
Handle extender
