Lanner V3S, User Manual, Page: 64 / 69

V3S User Manual
64
Connecting the Devices
The system comes with a controller to ensure that the device is well-shielded against premature failure at
the boot or shutdown phase. When installing:
1.
Make sure both your vehicle and the system are turned off.
2. Follow the wiring definition and illustration below to connect the vehicle battery and ignition (ACC) to
the in-vehicle system through the 3-pin terminal block connector as DC Input.
+ -
IG
Power Ground Ignition
DC Input
Positive
Negative
Ignition in
BATTERY