Appendix B:
Digital Input/Output
The Digitanl I/O on the rear panel is designed to provide
the input and output operations for the system. For
sample DIO code, see SuperIO folder under LVC-2001
Utility on the
Driver and Manual CD
. Make sure that
you have installed the Lanner GPIO driver as instructed
below.
Driver Installation
Before you could access or control the operation of
the G-sensor, GPS and Digital I/O functions, install the
the L_IO driver which is the library and driver needed
for Lanner General Purpose Input/Output interface or
functions.
To install the L_IO driver:
Restart the computer, and then log on with
1.
Administrator privileges.
Insert the Drivers and User’s Manual CD to the USB-
2.
optical drive.
Browse the contents of the support CD to locate the
3.
file in the LIO folder.
From the control panel, click the ADD Hardware
4.
program
5. Select Next to proceed
6. Answer “Yes” to the question and select Next to
proceed.
7. Select Add a new hardware device.
