Lanner LVC-2001, User Manual

Page: 17 / 42

Jumper Settings
JCMOS1/2 (Clean CMOS Jumper) :
This jumper is used to erase data in CMOS. To clear CMOS,
first turn off your system and unplug power source. Then,
by placing the cap on pin 2 and 3 (short pin 2-3), this
jumper can erase the system settings stored in CMOS
memory.
Pin Description
Short 1-2 Normal (default)
Short 2-3 Clear RTC
JVLCD1:
jumper for LVDS power setting
Pin Description
Short 1-2 V3P3S
Short 2-3 V5S
JMCU1:
Programming the MCU
Pin Description
Short 1-2 Program MCU
Short 2-3 Normal (default)
JDEV1: EEPROM setting
Pin Description
Short 1-2 EEPROM
Short 2-3 0x40h (default)
JCFG2
Pin Description
Short 1-2 18bpp (default)
Short 2-3 24bpp
1
1
Connectors
VGA (VGA1)
Pin Signal Pin Signal Pin Signal
1 RED 6 GND 11 N/A
2 GREEN 7 GND 12 DDC DAT
3 BLUE 8 GND 13 VGA_HS
4 N/A 9 V5S_VGA 14 VGA_VS
5 GND 10 GND 15 VGA_CLK
HDMI (HDMI1)
Pin Description Pin Description
1 HDMI_DATAP2 2 GND
3 HDMI_DATAN2 4 HDMI_DATAP1
5 GND 6 HDMI_DATAN1
7 HDMI_DATAP0 8 GND
9 HDMI_DATAN0 10 HDMI_CLKP
11 GND 12 HDMI_CLKN
13 N/A 14 N/A
15 HDMI_DDC_CLK 16 HDMI_DDC_DAT
17 GND 18 V5S_HDMI
19 HDMI_HPD
USB2.0 (USB1)
Pin Description Pin Description
1 V5S_USB1 3 USBDP1
2 USBDN1 4 GND
USB3.0 (USB2)
Pin Description Pin Description
1 V5S_USB2 5 USB3_SSRXN
2 USBDN2 6 USB3_SSRXP
3 USBDP2 7 GND
4 GND 8 USB3_SSTXP
9 USB3_SSTXN
15 14 13 12 11
5 4 3 2 1