Lanner HCP-72i1, User Manual

Page: 104 / 116

104
www.lannerinc.com
Scenario 2: The Bottom Board Used as the Management Port, and Return the Device 2
and 3 to the Upper Board.
Remove the Device 2 and 3 from the Bottom Board
For the Bottom Board, please issue the following command:
~#sh ./stop_lan_device.sh 0 rescue
Switch the downstream port 0x10, 0x11 into the Upper Board.
For the Bottom Board, please issue the following commands accordingly:
~# sh ./en_management.sh 0
~# sh ./recover_slot.sh 0
The Upper Board rescans to see that if there is any new devices added or not.
In the Upper Board, please issue the following command:
~# echo 1 > /sys/bus/pci/rescan
Instructions of Commands
<recover_slot.sh>
Paratmeters:
recover_slot.sh slot_number
Function Description:
Return the devices that had been switched.
Main Commands of the Script:
~# ./vs_test “ Upstream port BusID:DeviceID:FunctionID “ VS_ID recover