Lanner FX-3230, User Manual, Page: 87 / 105

Chapter 4: BIOS Setup
85
Use [ → ] or [ ← ] to select [Server Mgmt] setup screen. Under this screen, you may use [↑] [↓ ] to select an
item you want to configure.
Item Option Description
BMC Support
Enabled
Disabled
Enable or disables interfaces to communicate with BMC.
Wait For
BMC
Enabled
Disabled
Wait For BMC response for specified time out. In PILOTII, BMC starts
at the same time when BIOS starts during AC power ON. It takes
around 30 seconds to initialize Host to BMC interfaces.
FRB-2 Timer
Enabled
Disabled
Enables or disables FRB-2 timer (POST timer).
FRB-2 Timer
timeout
3 minutes
4 minutes
5 minutes
6 minutes
Enter value Between 3 to 6 min for FRB-2 Timer Expiration value.
FRB-2 Timer
Policy
Do Nothing
Reset
Power Down
Power Cycle
Configure how the system should respond if the FRB-2 Timer expires.
Not available if FRB-2 Timer is disabled.
OS
Watchdog
Enabled
Disabled
If enabled, it starts a BIOS timer which can only be shut off by
Management Software after the OS loads. It also helps verify that