Lanner FX-3230, User Manual, Page: 45 / 105

45
FX-3230 User Manual
Installing the Slide Rails
Now, you shall install the slide rail
assemblies onto the rack.
9. This slide-rail kit does NOT require
screw-fixing. Simply aim at
3
available screw holes on the rack
front and snap the rail front into
the rack post as shown in the
image below. You should hear a
“click” sound once it is firmly
attached.
10. For the rear rack installation, slide
the rail to aim and engage the
bolts on the rail’s rear end with the
2 available holes on the post, and
the rail assembly will click into
place.
Installing the System into the Rack
11. Stretch both of the inner rails out
to their fullest extent. You will hear
a click sound when they are fully
stretched and locked.
Click
The inner rail will click
when it is fully stretched.
1
Click
Click
Use this clamp
to fix the front
end of the rail
onto the post.