5/19/2021
www.lankota.com | Lankota Inc.
Page | 17
Lankota is a registered trademark of Lankota Group.
Setup
5.
Raise the corn cracker and move the plug from its storage point to the
operating position in the bottom.
6.
Park the tractor in the grinding location and lower the mill to the ground.
7.
Adjust the height of the footpads and the length of the top 3
-
point arm.
•
The driveshaft should be as level as possible.
•
At least 3 of the mill foot pads should be firmly on the ground.
•
The top link of the 3
-
point should be loose.
