5/19/2021
www.lankota.com | Lankota Inc.
Page | 16
Lankota is a registered trademark of Lankota Group.
Setup
1.
Use a tractor that has 120+ hp (at PTO) and has 1000 rpm PTO.
2.
Slide the correct PTO half
-
shaft onto the mill and set it in the PTO rest.
3.
Attach the hammer mill to the 3
-
point of the tractor. The 3
-
point arms
can be adjusted forward or backward depending on the tractor.
4.
Connect the PTO driveshaft and the hydraulic hoses.
•
There are two pairs of hoses—one set is for chute rotation and the
other for deflector up and down. Turn the hydraulic FLOW DOWN
for both SCVs.
