8
GETTING STARTED
First Call
Insert a SIM card (Switch off your phone at first, and then remove the battery). Enter the area code
and the phone number and press Pick Up Key.
Tip:
Before you get started, you must insert a valid SIM card in your phone and charge the battery first.
SIM Card: Please refer to “Mounting the SIM Card” for more reference on installation.
Charging the battery: please refer to “Charging the battery” for more details.
Mounting the SIM Card
Your mobile phone number, PIN (Personal Identification Number), PIN2, PUK (Personal Unlock Key),
PUK2 (Personal Unlock Key2), IMSI (International Mobile Subscriber Identity), the network information,
the phonebook data, SMS (short messages) and other data are stored in your SIM card.
Note:
This particular phone model only supports the SIM cards of 1.8V and 3V.
Some network operators don’t offer PIN2 and PUK2, so functions using those passwords will be
unavailable.
The SIM card and its contacts can be damaged by scratches or bending easily, so be careful while
handling, inserting or removing the card.
Keep all miniature SIM cards out of children’s reach.
Note:
Always make sure the phone is switched off before you insert or remove the SIM card, otherwise it
may damage the SIM card.
Mounting
Remove the battery cover by sliding it. Insert the SIM card, with the notch at the bottom right and the
gold contacts face down, into the card slot. Align the card to the arrow sign as the following picture
shows:
Replace the battery and close the cover tightly.
Note:
If the SIM Card is installed improperly or damaged, the prompt words “Insert SIM” will display on the
screen after you switch on your phone. Remove the SIM Card and check the way that performs as
pictures show, and then mount it again.
Summary of Contents for LX11
Page 1: ...PN 5839003414 ...
