Lanier JP1030, Operator'S Manual

Page: 27 / 128

Standard Printing
15
1
Note
❒
If the image position is not
correct, adjust it using the
{{{{
Image Position
}}}}
keys or the
fine adjustment dial. See p.18
“Adjusting the Print Image
Position”.
❒
If the image density is slight-
ly dark or light, adjust the
image density using the
{{{{W W W W}}}}
or
{{{{V
V V
V}}}}
key. See p.20 “Adjust-
ing the Print Image Density”.
D
Enter the number of prints
with the number keys.
Note
❒
Up to 9999 prints can be en-
tered at one time.
❒
To change the number en-
tered, press the
{{{{
Clear/Stop
}}}}
key and enter the new num-
ber.
E
Press the
{{{{
Print
}}}}
key.
Note
❒
After printing is completed,
the same number of prints is
automatically set for the next
job.
❒
To stop the machine during
the multi-print run, press the
{{{{
Clear/Stop
}}}}
key. See p.24
“S t oppi n g a M ul t i- pri nt
Run”.
❒
To return the machine to the
initial condition after print-
i n g , p r e s s t h e
{{{{
C l e a r
Modes/Energy Saver
}}}}
key.
PinkGold-F_V4_FM.book Page 15 Tuesday, September 11, 2001 6:31 PM