Lanier JP1030, Operator'S Manual

Page: 26 / 128

Operation
14
1
Note
❒
Up to 9999 prints can be en-
tered at one time.
❒
To change the number en-
tered, press the
{{{{
Clear/Stop
}}}}
key and enter the new num-
ber.
C
Press the
{{{{
Start
}}}}
key.
Printing starts automatically af-
ter trial print is delivered.
Note
❒
After printing is completed,
the same number of prints is
automatically set for the next
job.
❒
To stop the machine during
the multi-print run, press the
{{{{
Clear/Stop
}}}}
key. See p.24
“ Sto ppi ng a M ul t i-p rin t
Run”.
❒
To return the machine to the
initial condition after print-
i n g , p r e s s t h e
{{{{
C l e a r
Modes/Energy Saver
}}}}
key.
When Auto Cycle is off
A
Make sure that Auto Cycle
mode is not selected.
B
Press the
{{{{
Start
}}}}
key.
A trial print is delivered to the
paper delivery tray.
C
Press the
{{{{
Proof
}}}}
key and check
the image density and the im-
age position of the proof print.
PinkGold-F_V4_FM.book Page 14 Tuesday, September 11, 2001 6:31 PM