Lanier IS100e, Operator'S Manual

Page: 30 / 96

Setting up Your Machine
2-8
Setting up Your Network Parameters
Before using IMAGE SCANNER IS100e, please setup IMAGE SCANNER
IS100e properly on your network to perform e-mail and filing functions. The
following network parameters have to be set. For required information and
LAN connection, please contact your network administrator.
To set up the network parameters via the control panel,
1. After turning on IMAGE SCANNER IS100e, press the “Menu” key and
then the Network Configuration item to prompt the Network
Configuration screen (see below) in the LCD-display.
The access to the Network Configuration is blocked by the administrator
password. It is recommended that an administrator create a password
before perform these activities. Both Login and Password are in blank for
the default.
1. IP Address: . . .
2. Subnet Mask: . . .
3. Gateway IP: . . .
4. DNS Server: . . .
5. NTP Server: . . .
6. SMTP Server: . . .
7. SMTP Port: . . .
8. POP3 Server . . .
9. Enable DHCP
10. Save & Exit
11. Exit
The Network Parameter Settings
2. Consult your network administrator for the network parameters and enter
them respectively.
3. Use the
q
key to scroll the Save & Exit menu and press the “OK” key
to save your setting.