Copier Terms
Glossary
G - 1
Copier Terms
The ratio of the original image size to the copied image size. If the copy image is larger than the original, the% number is larger.
A copied image that is twice the size of the original is said to be 200%. If the copy image is smaller than the original, the%
number is lower. A copied image that is half the size of the original is said to be 50%.
The portion of the Control Panel with numerical keys. These keys are used primarily to input the desired number of copies and are
also used to input numerical data into the copier during programming.
Any bound original that cannot be fed through the Feeder. Because the pages cannot be separated, they must be copied manually
from the Exposure Glass. The Book Original features can be used to make the book copying process more efficient.
A Tray used to feed single sheets of special or transparent stock into the copier to be copied. Because sheets from this tray feed
straight through the copier paper path, the Tray is especially useful for feeding heavy stock. See also: Stack Feed Bypass Tray.
Casual Operator
An operator that uses the copier to make copies but does not have Key Operator responsibilities such as adding Toner or calling
for service.
Charge Corona
A device located near the Drum that activates the light sensitivity of the Drum and prepares it to be exposed and imaged.
Cleaning Unit
An assembly that cleans any residual image toner from the Drum in preparation for the next image.
The Key used to stop a copy job while it is still running. It may also be used to clear program functions from a previous job and
return to the default settings.
Summary of Contents for 5580
