Lanier 5415, Operator'S Manual

Page: 11 / 104

Making a Copy
Making Copies 1 - 3
Making a Copy
1
Select the copy options from the Copy Options table below.
Note: If you only want one copy with no options, proceed to Step 2.
2
Place the original document on the Exposure Glass or in the optional Automatic Document
Feeder.
3
Press the Start key to begin copying.
Copy Options
You Can Select
Methods to Use for the Copy Options
Copy Quantity Press the (1) key to enter quantities up to 9.
Press the (10) key to enter copies in increments of 10
Press the (10) key in combination with the (1) key to enter
other values.
See “Selecting Copy Quantity” on page 3-6.
Copy Darkness/
Lightness
Automatic: Press the Auto Exposure key.
Manual: Press the increase or decrease density keys.
Photo: Press Auto Exposure key to select Photo mode.
See “Selecting Copy Darkness” on page 3-7.
Copy Reduction or
Enlargement
There are two modes for copy reduction or enlargement to
choose from.
Preset Ratios: Pre the Zoom key to select preset ratio.
Manual Zoom keys: Press and hold the 10 Key and/or 1 Key.
See “Enlargement and Reduction Ratios” on page 3-9.
Copying Methods Refer to the Table of Contents or Chapter 4 - Copying
Methods for detailed information on copying methods
available.