Section E
Perpendicular beam
installation
•
Hint:
•
It may be easier to put in the screws when the wheels
are removed
If your beams run
perpendicular to your
garage door you need
to run your 2x6 piece
differently
1. Cut your 2x6
approximately 50
inches long.
2. With the provided
hardware attach
both single pulleys
on the 2x6 34
inches from each
other. Make the
first pulley on
center and the
second pulley ½
inch left of center.
This will allow the
cables to run next
to each other
without
interference.
3. Mount the double
pulley on a 20 inch
2x6. You can
mount your double
pulley on the
celling or at the
top of the wall.
Attach your 2x6 to
three studs in line
with the double
pulley in the
corner of the wall.
4. Proceed to section
C.
Call toll free 1-866-284-7428
Langeoriginals.com
Copyright Lange Originals
9
34 inches
Mount third pulley (strap pulley) ½ inch left of center
Middle pulley (hook)
