CART
A
HOIST
™
GEN. 2
®
STEP 15 Storage
Special Instructions:
Undo the brakes on the rear wheels, and move the top carefully into a clear space. Lower the top
down to the base of the cart, aligning the rear section to nestle in the corner of the rubber coated base of the cradle (Fig. 1,
Fig. 2). Lower it completely to the ground until there is enough play in the straps . Don’t loosen the strap to much or you
will have to re-level them. To gain maximum storage space, remove the clevis pin, collapse the arm (fig. 3), and lower the
telescoping mid section into the main post. (Fig. 3) You can put the clevis pins back in their holes to retain them from
getting lost. Lock the rear casters in place. Unlock the position pins by pulling them out and then twisting them 1/4 turn.
Lift the hardtop and pull toward yourself while walking backward until the position pin clicks into place. Then lift up and
rest the top on the foam(fig.4). If you’re lucky enough to have an awesome Sahara or Rubicon with a painted top, you don’t
want to store it with the strap still on it. For whatever reason the paint Chrysler uses loves to take on dyes and inks from
just about anything in certain conditions. So take it off (the strap) or use some white towels to wedge in between the strap.
Reverse these directions to reinstall top.
Locate parts
: Assembled
Hoist A Cart
tm
Pictured while the top is in upright position for reference
Fig. 2
Fig. 1
Fig. 3
Fig. 5
Fig. 4
Page 16
