background image

Lang Manufacturing Company 

 6500 Merrill Creek Parkway

Everett, WA  98203

Part Number:  60802-17

Ph: 425-349-2400  Fax: 524-349-2733

January 1994

WARRANTY

Lang Manufacturing Limited Warranty
to Commercial Purchasers*

(Domestic U.S., Hawaii, &
Canadian Sales only.)

Lang Manufacturing Equipment (“Lang Equipment”)
has been skillfully manufactured, carefully inspected
and packaged to meet rigid standards of excellence.
Lang warrants its Equipment to be free from defects
in material and workmanship for (12) twelve
consecutive months, with the following conditions
and subject to the following limitations.

I.

  This parts and labor warranty is limited to Lang

Equipment sold to the original commercial
purchaser/users (but not original equipment
manufacturers), at its original place of installation, in
the continental United States, Hawaii and Canada.

Quartz elements are warranted for ninety(90) days
from the date of installation.

II.

  Damage during shipment is to be reported to the

carrier, is not covered under this warranty, and is the
sole responsibility of purchaser/user.

III.

  Lang, or an authorized service representative,

will repair or replace, at Lang’s sole election, and
Lang Equipment, including but not limited to, safety
valves, gas and electric components, found to be
defective during the warranty period.  As to warranty
service in the territory described above, Lang will
absorb labor and portal to portal transportation costs
(time & mileage) for the first (12) twelve months
from the date of installation or eighteen (18) months
from date of shipment from Lang Manufacturing,
which ever comes first.

IV.

  This warranty does not cover routine general

maintenance, periodic adjustments, as specified in
operating instructions or manuals, and consumable parts
such as quartz elements, or labor costs incurred for
removal of adjacent equipment or objects to gain access
to Lang Equipment.  This warranty does not cover
defects caused by improper installation, abuse, careless
operation, or improper maintenance of equipment.

V.

   

THIS WARRANTY IS EXCLUSIVE AND IS IN

LIEU OF ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, EACH OF WHICH
IS HEREBY EXPRESSLY DISCLAIMED. THE
REMEDIES DESCRIBED ABOVE ARE EXCLUSIVE
AND IN NO EVENT SHALL LANG BE LIABLE FOR
SPECIAL, CONSEQUENTIAL  OR INCIDENTAL
DAMAGES FOR THE BREACH OR DELAY IN
PERFORMANCE OF THIS WARRANTY.

VI.

  Lang Equipment is for commercial use only. If sold

as a component of another(OEM) manufacturer’s
equipment, or if used as a consumer product, such
Equipment is sold AS IS and without any warranty.

Summary of Contents for SR-18-8T








Reviews: