![background image](http://html1.mh-extra.com/html/lang/rt36a/rt36a_installation-and-operation-instructions-manual_3618463005.webp)
5
2M-W1091, Commerical & Marine Electric Range T
op
2M-W1091, Commerical & Marine Electric Range T
op
UNPACKING
Receiving the Range
Upon receipt, check for freight damage, both visible and concealed. Note visible
damage on the freight bill at the time of delivery and require the carrier’s agent to
sign the freight bill. Concealed loss or damage means loss or damage, which does
not become apparent until the merchandise has been unpacked. If concealed loss
or damage is discovered upon unpacking, make a written request for inspection
by the carrier’s agent within 15 days of delivery. Keep all packing material for
inspection. Do not return damaged merchandise to Lang Manufacturing, file your
claim with the carrier.
Location
Prior to un-crating, move the range as near its intended location as practical. The crating will help protect
the unit from the physical damage normally associated with moving it through hallways and doorways.
Un-crating
The range will arrive completely assembled inside a wood frame covered by cardboard box and strapped
to a skid. Remove the cardboard cover, cut the straps and remove the wood frame.
RANGE WEIGHS 410 LBS (186 kilograms). FOR SAFE HANDLING, INSTALLER
SHOULD OBTAIN HELP AS NEEDED, OR EMPLOY APPROPRIATE MATERIALS
HANDLING EQUIPMENT (SUCH AS A FORKLIFT, DOLLY, OR PALLET JACK)
TO REMOVE THE UNIT FROM THE SKID AND MOVE IT TO THE PLACE OF
INSTALLATION.
ANY STAND, COUNTER OR OTHER DEVICE ON WHICH RANGE WILL BE
LOCATED MUST BE DESIGNED TO SUPPORT THE WEIGHT OF THE OVEN
(410 LBS.).
SHIPPING STRAPS ARE UNDER TENSION AND CAN SNAP BACK WHEN
CUT.
Remove range from skid and place in intended location.
INSTALLING THE LEGS
Legs or Casters are available and must be specified upon ordering.
To install the 6-inch legs, remove the legs from the range packing, place some cardboard on the floor and
gently tip the range onto its back. Fasten the legs into the threaded holes provided and then gently flip
the oven onto its legs.
To install the 6-inch casters, remove the casters from the oven cavity, place some cardboard on the floor
and gently tip the range onto its back. Attach the casters to the adapter plates. Install the four adapter
plates (one in each corner with the flange pointed toward the oven). Gently tip the oven onto its casters.
CAUTION