Start-up
42
30.11.12
7.4 Assembly of Electrical Connectors
Observe the following operation sequence to
assemble the electrical connectors of the positioning
system:
1. Clean connectors before connecting.
2. Plug in the connectors (provided cables
according to the labeling).
3. Fasten the connectors by using the screw
locking.
4. Lay cables that they do not interfere (ensure that
the cables do not slide or clamp over the total
traveling range of the positioning system).
5. Fix the cables with appropriate tools.
7.5 Switching-on Conditions
WARNING
Improper start-up could result in
serious injury and/or significant
damage.
•
Check operating range for
persons before switching on
power supply.
•
An appropriate program is
installed on the controller.
