10
Tighten the air shutter screws.
If the broiler flame ignites on 1/2 of the tile face only, the gas/air mixture is too lean, push the air shutter in
slightly and test for proper ignition
Figure 1
ACCESS TO BROILER CONTROL COMPONENTS
TRANSFORMER AND AIR SWITCH
The transformer and air switch are located in a sheet metal box located under the griddle on the left hand
side as you face the front of the griddle.
Access is gained by removing two sheet metal screws which hold the bottom of the box to the griddle.
Figure 2
SPARK CONTROL MODULE
The spark control module and tilt switch are located inside the broiler hood.
Summary of Contents for GGB-24
Page 18: ...15 WIRING DIAGRAM ...
