UL File# MH19366
6
Equipment Description
Lang Model: GCOF-PPNATFD
Exterior Construction
The oven exterior dimensions are 40” (100 cm) Wide, 32” (80 cm) High, 38”
(95 cm) Deep. The Top, Front, Back, and Sides are constructed of stainless
steel with an aluminized bottom.
The oven doors come standard with a double pane window.
The door handle is constructed of Stainless Steel and Phenolic Tubing.
The oven cavity is insulated with high temperature insulation for efficiency
and reduced heat loss.
Interior Construction
The oven cavity dimensions are 29” (72.5 cm) Wide, 20” (50.84 cm) High,
21” (53.38 cm) Deep.
The interior of the oven is constructed of porcelainized stainless steel.
Operation
The GCOF-PPNATFD oven is a forced air convection oven with a vented
oven cavity.
The air is driven by a 1/3 HP fan motor.
Controls
Complete computerized controls.
Pre-Programmable product selections.
Independent shelf timers for each shelf.
Load control through use of Cooking Curves.
Shelf compensation for uniform baking.
Solid state temperature sensing and controls.
Dual speed fan.
Manual override controls.
Technical
The GCOF-PPNATFD oven operates on either Natural Gas or Propane and
can be field converted to either gas.
Floor space required is 48” (122.6 cm) wide, 44” (112.5 cm) deep.
The oven weighs 500 lbs. (227.28 kg).
Contact the factory for correct orifice sizes when installing oven above 4000
ft.
The GCOF-PPNATFD has electronic ignition and requires a 120-Volt single-
phase connection.