2M-W363: Electric Clamshell® CSE12A
4
Safety Precautions
Lang manufacturing, hereby disclaims any and all responsibility for injury, damage, loss or other claim that may occur
to person or property from improper alteration, modification, addition, operation, maintenance or service, whether it be
mechanical, electrical, or otherwise, which may occur from such improper alteration, modification, addition, operation,
maintenance or service to this piece of equipment.
Safety Considerations
Your 12-inch Clamshell® is manufactured to rigid standards. This equipment is approved by a certifying agency to
conform to safety and sanitation standards.
The presence of safety equipment control and interlocks on an appliance and attendant components of installation
cannot in and of themselves, assure absolute safety of operation. Diligent, capable, well-trained operators and
maintenance personnel, as well as proper programs of operation and maintenance, are essential to the safe and
reliable operation of this appliance.
A. The
responsibility of the manufacturer
is to supply suitable, comprehensive instructions and recommendations
for the operation and maintenance of the appliance.
B. Trained qualified and factory-authorized personnel must perform all operation, maintenance and repair of these
appliances. It is the
responsibility of the owner/operator
to ensure that this happens.
C. A regular periodic program of cleaning, inspection and maintenance must be established and comprehensive
maintenance records maintained. It is the
sole responsibility of the user
to establish, schedule and enforce the
frequency and scope of these programs in keeping with recommended practice and with due consideration given
to actual operating conditions.
D. Operate this appliance within the limits it was designed for, which will not exceed the working limits of any component
within the appliance as a whole.
HIGH VOLTAGES ARE PRESENT INSIDE THIS APPLIANCE WHEN THE UNIT IS PLUGGED/
WIRED INTO A LIVE RECEPTACLE. BEFORE REPLACING ANY PARTS, DISCONNECT THE
UNIT FROM THE ELECTRIC POWER SUPPLY.
USE OF ANY REPLACEMENT PARTS OTHER THAN THOSE SUPPLIED BY LANG
MANUFACTURING, OR THEIR AUTHORIZED DISTRIBUTORS CAN CAUSE BODILY INJURY
OT THE OPERATOR AND DAMAGE TO THE EQUIPMENT EIWLL VOID ALL WARRANTIES.
GENERAL INFORMATION
Lockout Procedure
Announce lockout to other personnel.
Turn power off at main panel.
Test lockout by turning power switch on and observing if elements come on.
Check heater circuit with voltmeter.
Perform necessary repairs or tests.
Clear the unit of personnel before starting the griddle.
Turn power on at main panel.
Announce unit is “on” to other personnel.
Controls
The broiler turns on with the power switch of the griddle.
The broiler operates with full power when it is in the closed position. In the open position, the broiler will operate with
partial power and be in the “idle” mode.
Controls Contact Clam
This broiler turns on using the separete control box, see Operating instructions on page 10.
CAUTION
WARNING
