![background image](http://html1.mh-extra.com/html/lang/ecoh-c3vcn/ecoh-c3vcn_assembly-installation-and-operation-instructions_3585869012.webp)
12
General Operation & Programming
Convection ovens constantly circulate air over and around the product. This strips away the thin layer of moisture
and cool air from around the product allowing heat to penetrate more quickly.
Always weigh your product. This will give you a more consistent size, color and quality.
Check the product near the end of the initial cooking.
Do not open the oven door during baking, as this will change the baking characteristics of the oven and make it
difficult to determine a final program.
If the product is overdone on the outside and underdone on the inside, reduce the baking temperature.
If the product is pulling away from the edge of the pan, the temperature is too high or the cooking time too long.
A convection oven is a mechanical piece of equipment. The same control settings will always give the same results.
If the results vary, problems may be because of changes in the product preparation.
Control Panel
The Control panel consists of the following items. Detailed operational descriptions are given later this section.
Power Switch:
Turns the oven on and off
Status Display:
Displays the oven status
(preheat, ready, done) and is the count down
timer.
Shelf Timers:
Numbered 1 to 6, these
buttons represent different shelf positions.
Button #
Shelf Position
1
Top Left
2
Top Right
3
Middle Left
4
Middle Right
5
Bottom Left
6
Bottom Right
Pace Timers:
Labeled C, P, and E these
buttons are adjustable from one to thirty
minutes.
Minute Timers:
There are two “Minute”
timers. “1” is programmed for one minute,
“2” is programmed for two minutes.
Temp Button:
When pressed this button will
display the temperature of the oven.
Program Enable Buttons:
These are
“hidden” buttons that allow the times of the
shelf position buttons to be set.
Power Switch
Shelf Timers
Status Display
Pace
Timers
Minute
Timers
Temperature
Button
Program
Enable Button
IL1428