background image

 

5

 

UNPACKING 

3.1 Receiving the Griddle 

Upon receipt, check for freight damage, both visible and concealed.  Visible 
damage should be noted on the freight bill at the time of delivery and signed by the 
carrier's agent.  Concealed loss or damage means loss or damage which does not 
become apparent until the merchandise has been unpacked.  If concealed loss or 
damage is discovered upon unpacking, make a written request for inspection by the 
carrier's agent within 15 days of delivery.  All packing material should be kept for 
inspection.  Do not return damaged merchandise to Lang Manufacturing Company.  
File your claim with the carrier. 

3.2 Location 

Prior to un-crating, move the griddle as near its intended location as practical.  The 
crating will help protect the unit from the physical damage normally associated 
with moving it through hallways and doorways. 

3.3 Un-crating 

The griddle will arrive completely assembled inside a wood frame covered by 
cardboard box and strapped to a skid.  

Remove the cardboard cover, cut the 

straps and remove the wood frame.   

Remove griddle from skid and place in intended location. 
 

 

CAUTION 

GRIDDLE WEIGHS 515 lbs (234 kg).  FOR SAFE HANDLING, INSTALLER 
SHOULD OBTAIN HELP AS NEEDED, OR EMPLOY APPROPRIATE 
MATERIALS HANDLING EQUIPMENT (SUCH AS A FORKLIFT, DOLLY, OR 
PALLET JACK) TO REMOVE THE UNIT FROM THE SKID AND MOVE IT TO 
THE PLACE OF INSTALLATION. 

 

CAUTION 

ANY STAND, COUNTER OR OTHER DEVICE ON WHICH GRIDDLE WILL BE 
LOCATED MUST BE DESIGNED TO SUPPORT THE WEIGHT OF THE 
GRIDDLE. 

 

CAUTION 

SHIPPING STRAPS ARE UNDER TENSION AND CAN SNAP BACK WHEN 
CUT. 

 

 

 

Summary of Contents for CLGPB-48A-E

















Reviews: