background image

 

4

 

IMPORTANT READ 

FIRST IMPORTANT 

CAUTION 

GRIDDLE WEIGHS 515 lbs (234 kg).  FOR SAFE HANDLING, INSTALLER 
SHOULD OBTAIN HELP AS NEEDED, OR EMPLOY APPROPRIATE 
MATERIALS HANDLING EQUIPMENT (SUCH AS A FORKLIFT, DOLLY, OR 
PALLET JACK) TO REMOVE THE UNIT FROM THE SKID AND MOVE IT TO 
THE PLACE OF INSTALLATION. 

 

CAUTION 

ANY STAND, COUNTER OR OTHER DEVICE ON WHICH GRIDDLE WILL BE 
LOCATED MUST BE DESIGNED TO SUPPORT THE WEIGHT OF THE 
GRIDDLE. 

 

CAUTION 

SHIPPING STRAPS ARE UNDER TENSION AND CAN SNAP BACK WHEN 
CUT. 

 

DANGER 

THIS APPLIANCE MUST BE GROUNDED AT THE TERMINAL PROVIDED.  
FAILURE TO GROUND THE APPLIANCE COULD RESULT IN 
ELECTROCUTION AND DEATH. 

WARNING 

INSTALLATION OF THE UNIT MUST BE DONE BY PERSONNEL QUALIFIED 
TO WORK WITH ELECTRICITY.  IMPROPER INSTALLATION CAN CAUSE 
INJURY TO PERSONNEL AND/OR DAMAGE TO EQUIPMENT.  UNIT MUST BE 
INSTALLED IN ACCORDANCE WITH ALL APPLICABLE CODES. 

 

NOTICE 

The data plate is located behind the access panel in the back of the griddle.  
The griddle voltage, wattage, serial number, wire size, and clearance 
specifications are on the data plate.  This information should be carefully 
read and understood before proceeding with the installation. 

 

NOTICE 

The installation of any components such as a vent hood, grease extractors, 
fire extinguisher systems, must conform to their applicable National, State 
and locally recognized installation standards. 

 

CAUTION 

ALWAYS KEEP THE AREA NEAR THE APPLIANCE FREE FROM 
COMBUSTIBLE MATERIALS. 

 

CAUTION 

KEEP FLOOR IN FRONT OF EQUIPMENT CLEAN AND DRY.  IF SPILLS 
OCCUR, CLEAN IMMEDIATELY, TO AVOID THE DANGER OF SLIPS OR 
FALLS. 

 

WARNING 

KEEP WATER AND SOLUTIONS OUT OF CONTROLS.  NEVER SPRAY OR 
HOSE CONTROL CONSOLE, ELECTRICAL CONNECTIONS, ETC.

 

 

CAUTION 

MOST CLEANERS ARE HARMFUL TO THE SKIN, EYES, MUCOUS 
MEMBRANES AND CLOTHING.  PRECAUTIONS SHOULD BE TAKEN TO 
WEAR RUBBER GLOVES, GOGGLES OR FACE SHIELD AND PROTECTIVE 
CLOTHING.  CAREFULLY READ THE WARNING AND FOLLOW THE 
DIRECTIONS ON THE LABEL OF THE CLEANER TO BE USED. 

 

NOTICE 

Service on this, or any other, LANG appliance must be performed by 
qualified personnel only.  Consult your authorized service station directory 
or call the factory at 1-800-224-LANG (5264), or 

WWW.LANGWORLD.COM

   

for the service station nearest you. 

 

WARNING 

BOTH HIGH AND LOW VOLTAGES ARE PRESENT INSIDE THIS APPLIANCE 
WHEN THE UNIT IS PLUGGED/WIRED INTO A LIVE RECEPTACLE.  BEFORE 
REPLACING ANY PARTS, DISCONNECT THE UNIT FROM THE ELECTRIC 
POWER SUPPLY. 

 

CAUTION 

USE OF ANY REPLACEMENT PARTS OTHER THAN THOSE SUPPLIED BY 
LANG OR THEIR AUTHORIZED DISTRIBUTORS CAN CAUSE BODILY 
INJURY TO THE OPERATOR AND DAMAGE TO THE EQUIPMENT AND WILL 
VOID ALL WARRANTIES. 

 

 

Summary of Contents for CLGPB-48A-E

















Reviews: